Red Seal Trades › Steamfitter / Pipefitter (307A) › Renewable Energy Systems

🇨🇦 307A · BLOCK F · ~8% OF THE EXAM

Renewable Energy Systems — Steamfitter/Pipefitter (307A) Practice Questions

Renewable Energy Systems makes up about 8% of the 307A Steamfitter / Pipefitter Red Seal exam. Below are 3 free practice questions from this block, each with the answer and a plain-English explanation of why it is right.

Practice all 8 Renewable Energy Systems questions →

Free Renewable Energy Systems practice questions

  1. 1.A geo-exchange (ground-source heat pump) system uses what as the heat source/sink?

    • A.Air
    • B.The relatively constant temperature of the earth (ground or groundwater)✓
    • C.Combustion
    • D.Solar only

    Why: Geo-exchange systems circulate fluid through underground loops, exchanging heat with the earth (~10°C year-round in most of Canada). Heating in winter, cooling in summer, very efficient.

  2. 2.An open-loop geo-exchange system uses:

    • A.Sealed buried piping
    • B.Groundwater pumped directly through the heat pump, then returned to the aquifer or surface✓
    • C.Only air
    • D.Only solar

    Why: Open-loop: well water pumped through the heat pump and discharged (return well or surface water). Higher efficiency but requires good water quality, sufficient flow, and discharge permits.

  3. 3.Antifreeze protection in a geo-exchange loop is typically provided by:

    • A.Calcium chloride
    • B.Propylene glycol or methanol mixed with water✓
    • C.Ethylene glycol always
    • D.Salt

    Why: Propylene glycol (non-toxic) or methanol are common. Ethylene glycol is toxic and not preferred for ground loops due to environmental concerns if a leak occurs. Concentration based on minimum expected temperature.

5 more Renewable Energy Systems questions inside

Plus a timed 307A exam simulator, spaced-repetition review of every question you get wrong, and an AI tutor you can ask “why?”.

Start free — 20 questions a day →

Other 307A exam blocks

Common Occupational SkillsLayout, Fabrication & PipingRigging, Hoisting & LiftingSteam & Condensate SystemsHeating, Cooling & Process Piping

Other Red Seal trades

Construction Electrician (309A)Industrial Electrician (442A)Plumber (306A)Automotive Service Technician (310S)Carpenter (403A)Tool and Die Maker (430A)Industrial Mechanic (Millwright) (433A)Welder (456A)

RedSeal Prep Pro is an independent study tool. Practice questions are original content written in the style of the Certificate of Qualification and are not affiliated with the Red Seal Program, the Steamfitter / Pipefitter trade board, or any provincial certification body.